Coatings

Coatings

Showing 7 products

Ignition Barrier - 5 Gallon

FS-IB™ Ignition Barrier is a single component, water-based latex coating for use as an ignition barrier over interior Spray Polyurethane Foam (SPF) insulation. FS-IB™ uses intumescent technology to protect SPF from flame source impingement. FS-IB™ is designed specifically as a protective coating over spray foam insulation in non-occupied areas, such as crawl spaces and uninhabited attics in both residential and commercial structures. The product has been tested successfully under the AC 377, Appendix X test method. FS-IB™ is fast drying and easy to use with standard commercial airless spray equipment.This is a professional coating and should only be used by trained professionals. If you would like to be trained please contact flameseal@flameseal.com

$300.00 USD

TB-C - White

Flame Seal TB-C™ is the first and only thermal barrier coating approved, under ULC S124-06, over spray polyurethane foam (SPF) in Canada. Flame Seal TB-C™ meets all requirements of the Canadian National and Provincial Building Code 3.1.5.12 standard, giving a new advanced option for SPF protection for the Canadian market. Flame Seal TB-C™ comes in 5 colors; white, three shades of gray, and black; giving options to design professionals. White is the standard color, while the others typically require a two week lead time.This product is for Canada onlyThis is a professional coating and should only be used by trained professionals. If you would like to be trained please contact flameseal@flameseal.com

$350.00 USD

FX-100 - 5 Gallon

FX-100™ is a clear two-part, intumescent coating with a substantially lower activation temperature than other intumescent coatings. This early protection allows the use of FX-100™ on substrates that most intumescent coatings cannot protect, including wood, some plastics, and other combustible substrates with low ignition temperatures. Upon exposure to heat or flame, the FX-100™ coating intumesces, building a foam char up to 100 times the original applied coating thickness. This foam char provides a functional fire barrier, protecting the substrate against both heat and flame.

$350.00 USD

Flame Seal FX950 (Class A Paint) - 5 Gallon

Flame Seal FX950 (FX950) is a water-based Intumescent paint that can be applied to most substrates including, lumber, plywood, OSB, and Gypsum. FX950 is fully tested and has a rating ranging from Class A to 2 hours to meet building codes domestically, internationally, and for the Wildfire Urban Interface. When Flame Seal FX950 is exposed to fire or extreme heat, a protective layer of Carbon Foam develops and prevents the fire and heat from transferring to the substrate. FX950 is a low VOC fire retardant paint with a smooth white architectural grade finish. This product can be paired with a primer and a top coat. For best application Flame Seal recommends using an airless sprayer, please see application guide for more information.

$375.00 USD

TB-Pro Thermal Barrier - 5 Gallon

TB-Pro has met the criteria for use as a 15-minute thermal barrier on Spray Polyurethane Foam (SPF). TB-Pro is a low VOC, water-based intumescent coating that dries to a flat finish. TB-Pro was subjected to flammability testing per NFPA 286 and successfully met the criteria as a thermal barrier over spray foam insulation. TB-Pro is approved for use as an alternative thermal barrier per IBC Section 2603.9/IRC R316.6 TB-Pro is AC-456 Compliant.TB-Pro should be applied in a single coat and does not require a primer.  These features make TB-Pro one of the easiest to use, fastest to apply thermal barriers available on the market.  Contact Us today to learn how TB-Pro is the right Thermal Barrier Coating for your next Spray Polyurethane Foam job. TB-Pro comes in standard white, charcoal black, and grey.CONTACT FLAMESEAL@FLAMESEAL.COM FOR BULK PRICING

$300.00 USD

FX-100 - 1 Gallon

FX-100™ is a clear two-part, intumescent coating with a substantially lower activation temperature than other intumescent coatings. This early protection allows the use of FX-100™ on substrates that most intumescent coatings cannot protect, including wood, some plastics, and other combustible substrates with low ignition temperatures. Upon exposure to heat or flame, the FX-100™ coating intumesces, building a foam char up to 100 times the original applied coating thickness. This foam char provides a functional fire barrier, protecting the substrate against both heat and flame.

$75.00 USD

FX-100 - 32 oz

FX-100™ is a clear two-part, intumescent coating with a substantially lower activation temperature than other intumescent coatings. This early protection allows the use of FX-100™ on substrates that most intumescent coatings cannot protect, including wood, some plastics, and other combustible substrates with low ignition temperatures. Upon exposure to heat or flame, the FX-100™ coating intumesces, building a foam char up to 100 times the original applied coating thickness. This foam char provides a functional fire barrier, protecting the substrate against both heat and flame.

$24.00 USD